Subjects: Optics >> Quantum optics submitted time 2023-02-19
Abstract: We demonstrate an on-chip single-mode Er3+-doped thin film lithium niobate (Er: TFLN) laser which consists of a Fabry-P\'erot (FP) resonator based on Sagnac loop reflectors (SLRs). The fabricated Er: TFLN laser has a footprint of 6.5 mmx1.5 mm with a loaded quality (Q) factor of 1.6x105 and a free spectral range (FSR) of 63 pm. We generate the single-mode laser around 1550-nm wavelength with a maximum output power of 44.7 {\mu}W and a slope efficiency of 0.18 %.
Peer Review Status:Awaiting Review
Subjects: Optics >> Quantum optics submitted time 2023-02-19
Abstract: The realization of ultrahigh quality (Q) resonators regardless of the underpinning material platforms has been a ceaseless pursuit, because the high Q resonators provide an extreme environment of storage of light to enable observations of many unconventional nonlinear optical phenomenon with high efficiencies. Here, we demonstrate an ultra-high Q factor (7.1*10^6) microresonator on the 4H-silicon-carbide-on-insulator (4H-SiCOI) platform in which both \c{hi}^(2) and \c{hi}^(3) nonlinear processes of high efficiencies have been generated. Broadband frequency conversions, including second-, third-, fourth-harmonic generation were observed. Cascaded Raman lasing was demonstrated in the SiC microresonator for the first time to the best of our knowledge. Broadband Kerr frequency combs covering from 1300 to 1700 nm were achieved using a dispersion-engineered SiC microresonator. Our demonstration is a significant milestone in the development of SiC photonic integrated devices.
Peer Review Status:Awaiting Review
Subjects: Optics >> Quantum optics submitted time 2023-02-19
Abstract: We demonstrate a robust low-loss optical interface by tiling passive (i.e., without doping of active ions) thin film lithium niobate (TFLN) and active (i.e., doped with rare earth ions) TFLN substrates for monolithic integration of passive/active lithium niobate photonics. The tiled substrates composed of both active and passive areas allow to pattern the mask of the integrated active passive photonic device at once using a single continuous photolithography process. The interface loss of tiled substrate is measured as low as 0.26 dB. Thanks to the stability provided by this approach, a four-channel waveguide amplifier is realized in a straightforward manner, which shows a net gain of ~5 dB at 1550-nm wavelength and that of ~8 dB at 1530-nm wavelength for each channel. The robust low-loss optical interface for passive/active photonic integration will facilitate large-scale high performance photonic devices which require on-chip light sources and amplifiers.
Peer Review Status:Awaiting Review
Subjects: Optics >> Quantum optics submitted time 2023-02-19
Abstract: We report the fabrication and optical characterization of Yb3+-doped waveguide amplifiers (YDWA) on the thin film lithium niobate fabricated by photolithography assisted chemo-mechanical etching. The fabricated Yb3+-doped lithium niobate waveguides demonstrates low propagation loss of 0.13 dB/cm at 1030 nm and 0.1 dB/cm at 1060 nm. The internal net gain of 5 dB at 1030 nm and 8 dB at 1060 nm are measured on a 4.0 cm long waveguide pumped by 976nm laser diodes, indicating the gain per unit length of 1.25 dB/cm at 1030 nm and 2 dB/cm at 1060 nm, respectively. The integrated Yb3+-doped lithium niobate waveguide amplifiers will benefit the development of a powerful gain platform and are expected to contribute to the high-density integration of thin film lithium niobate based photonic chip.
Peer Review Status:Awaiting Review
Subjects: Optics >> Quantum optics submitted time 2023-02-19
Abstract: We demonstrate monolithic integration of an electro-optically (EO) tunable microring laser on lithium niobate on insulator (LNOI) platform. The device is fabricated by photolithography assisted chemo-mechanical etching (PLACE), and the pump laser is evanescently coupled into the erbium (Er3+) doped LN microring laser using an undoped LN waveguide mounted above the microring. The quality factor of the LN microring resonator is measured as high as 1.54x10^5 at the wavelength of 1542 nm. Lasing action can be observed at a pump power threshold below 3.5 mW using a 980 nm continuous-wave pump laser. Finally, tuning of the laser wavelength is achieved by varying the electric voltage on the microelectrodes fabricated in the vicinity of microring waveguide, showing an EO coefficient of 0.33 pm/V.
Peer Review Status:Awaiting Review