分类: 光学 >> 量子光学 提交时间: 2023-02-19
摘要: Optical interference is not only a fundamental phenomenon that has enabled new theories of light to be derived but it has also been used in interferometry for the measurement of small displacements, refractive index changes and surface irregularities. In a two-beam interferometer, variations in the interference fringes are used as a diagnostic for anything that causes the optical path difference (OPD) to change; therefore, for a specified OPD, greater variation in the fringes indicates better measurement sensitivity. Here, we introduce and experimentally validate an interesting optical interference phenomenon that uses photons with a structured frequency-angular spectrum, which are generated from a spontaneous parametric down-conversion process in a nonlinear crystal. This interference phenomenon is manifested as interference fringes that vary much more rapidly with increasing OPD than the corresponding fringes for equal-inclination interference; the phenomenon is parameterised using an equivalent wavelength, which under our experimental conditions is 29.38 nm or about 1/27 of the real wavelength. This phenomenon not only enriches the knowledge with regard to optical interference but also offers promise for applications in interferometry.
分类: 光学 >> 量子光学 提交时间: 2023-02-19
摘要: We demonstrate an on-chip single-mode Er3+-doped thin film lithium niobate (Er: TFLN) laser which consists of a Fabry-P\'erot (FP) resonator based on Sagnac loop reflectors (SLRs). The fabricated Er: TFLN laser has a footprint of 6.5 mmx1.5 mm with a loaded quality (Q) factor of 1.6x105 and a free spectral range (FSR) of 63 pm. We generate the single-mode laser around 1550-nm wavelength with a maximum output power of 44.7 {\mu}W and a slope efficiency of 0.18 %.
分类: 光学 >> 量子光学 提交时间: 2023-02-19
摘要: We demonstrate an electrically driven compact hybrid lithium niobate microring laser by butt coupling a commercial 980-nm pump laser diode chip with a high quality Er3+-doped lithium niobate microring chip. Single mode lasing emission at 1531 nm wavelength from the Er3+-doped lithium niobate microring can be observed with the integrated 980-nm laser pumping. The compact hybrid lithium niobate microring laser occupies the chip size of 3 mmx4mmx0.5 mm. The threshold pumping laser power is 6 mW and the threshold current is 0.5 A (operating voltage 1.64 V) in the atmospheric temperature. The spectrum featuring single mode lasing with small linewidth of 0.05 nm is observed. This work explores a robust hybrid lithium niobate microring laser source which has potential applications in coherent optical communication and precision metrology.
分类: 光学 >> 量子光学 提交时间: 2023-02-19
摘要: The imaginary Poynting momentum (IPM) of light has been captivated an unusual origin of optomechanical effects on dipolar magnetoelectric particles, but yet observed in experiments. Here, we report, for the very first time, a whole family of high-order IPM forces for not only magnetoelectric but also generic Mie particles, assisted with their excited higher multipoles within. Such optomechanical phenomena derive from a nonlinear contribution of the IPM to the optical force, and can be remarkable even when the incident IPM is small. We observe the high-order optomechanics in a structured light beam with vortex-like IPM streamlines, which allows the low-order dipolar contribution to be suppressed. Our results provide the first unambiguous evidence of the ponderomotive nature of the IPM, expand the classification of optical forces and open new possibilities for optical forces and micromanipulations.
分类: 光学 >> 量子光学 提交时间: 2023-02-19
摘要: The comet-tail-like interference patterns are observed using photons from the spontaneous parametric down-conversion (SPDC) process. The patterns are caused by the angular-spectrum-dependent interference and the diffraction of a blazed grating. We present the theoretical explanation and simulation results for these patterns, which are in good agreement with the experimental results. The most significant feature of the patterns is the bright parabolic contour profile, from which, one can deduce the parameter of the parabolic tuning curve of the SPDC process. This method could be helpful in designing experiments based on SPDC.