Subjects: Optics >> Quantum optics submitted time 2023-02-19
Abstract： In this Letter, a ring-core erbium-doped fiber (RC-EDF), with two-layer erbium-doped structure, supporting up to the fourth-order orbital angular momentum (OAM) mode is designed and fabricated for OAM mode multiplexed amplification. Using the RC-EDF, the third- and fourth-order OAM modes amplification with ultra-low differential mode gain (DMG) is demonstrated by observing both the modal intensity and phase distribution and measuring the modal gain under the fundamental mode core-pumping. The measured average gain of four modes (l=+3, -3, +4, -4) multiplexed amplification is higher than 19dB cover the C-band and the DMG is less than 1dB. Additionally, the gain of two conjugate OAM modes are almost the same under different pump power no matter they are amplified simultaneously or separately.
Peer Review Status:
Awaiting Review
Subjects: Optics >> Quantum optics submitted time 2023-02-19
Lei Wan
Zhiqiang Yang
Wenfeng Zhou
Meixun Wen
Tianhua Feng
Siqing Zeng
Dong Liu
Huan Li
Jingshun Pan
Ning Zhu
Weiping Liu
Zhaohui Li
Abstract： A highly efficient on-chip acousto-optic modulator, as a key component, occupies an exceptional position in microwave-to-optical conversion. Homogeneous thin-film lithium niobate is preferentially employed to build the suspended configuration forming the acoustic resonant cavity to improve the modulation efficiency of the device. However, the limited cavity length and complex fabrication recipe of the suspended prototype restrain further breakthrough in the modulation efficiency and impose challenges for waveguide fabrication. In this work, based on a nonsuspended thin-film lithium niobate-chalcogenide glass hybrid Mach-Zehnder interferometer waveguide platform, we propose and demonstrate a built-in push-pull acousto-optic modulator with a half-wave-voltage-length product as low as 0.03 V cm, presenting a modulation efficiency comparable to that of the state-of-the-art suspended counterpart. Based on the advantage of low power consumption, a microwave modulation link is demonstrated using our developed built-in push-pull acousto-optic modulator. The nontrivial acousto-optic modulation performance benefits from the superior photoelastic property of the chalcogenide membrane and the completely bidirectional participation of the antisymmetric Rayleigh surface acoustic wave mode excited by the impedance-matched interdigital transducer, overcoming the issue of amplitude differences of surface acoustic waves applied to the Mach-Zehnder interferometer two arms in traditional push-pull acousto-optic modulators.
Peer Review Status:Awaiting Review
Subjects: Optics >> Quantum optics submitted time 2023-02-19
Di Xia
Zelin Yang
Pingyang Zeng
Bin Zhang
Jiayue Wu
Zifu Wang
Jiaxin Zhao
Mingqi Gao
Yufei Huang
Jianteng Huang
Liyang Luo
Dong Liu
Shuixian Yang
Hairun Guo
Zhaohui Li
Abstract： Photonic integrated microcombs have enabled advanced applications in optical communication, microwave synthesis, and optical metrology, which in nature unveil an optical dissipative soliton pattern under cavity-enhanced nonlinear processes. The most decisive factor of microcombs lies in the photonic material platforms, where materials with high nonlinearity and in capacity of high-quality chip integration are highly demanded. In this work, we present a home-developed chalcogenide glasses-Ge25Sb10S65 (GeSbS) for the nonlinear photonic integration and for the dissipative soliton microcomb generation. Compared with the current integrated nonlinear platforms, the GeSbS features wider transparency from the visible to 11 um region, stronger nonlinearity, and lower thermo-refractive coefficient, and is CMOS compatible in fabrication. In this platform, we achieve chip-integrated optical microresonators with a quality (Q) factor above 2 x 10^6, and carry out lithographically controlled dispersion engineering. In particular, we demonstrate that both a bright soliton-based microcomb and a dark-pulsed comb are generated in a single microresonator, in its separated fundamental polarized mode families under different dispersion regimes. The overall pumping power is on the ten-milliwatt level, determined by both the high Q-factor and the high material nonlinearity of the microresonator. Our results may contribute to the field of nonlinear photonics with an alternative material platform for highly compact and high-intensity nonlinear interactions, while on the application aspect, contribute to the development of soliton microcombs at low operation power, which is potentially required for monolithically integrated optical frequency combs.
Peer Review Status:Awaiting Review
Subjects: Optics >> Quantum optics submitted time 2023-02-19
Zhongjin Lin
Yanmei Lin
Hao Li
Mengyue Xu
Mingbo He
Wei Ke
Zhaohui Li
Dawei Wang
X. Steve Yao
Siyuan Yu
Xinlun Cai
Abstract： High-speed polarization management is highly desirable for many applications, such as remote sensing, telecommunication, and medical diagnosis. However, most of the approaches for polarization management rely on bulky optical components that are slow to respond, cumbersome to use, and sometimes with high drive voltages. Here, we overcome these limitations by harnessing photonic integrated circuits based on thin-film lithium niobate platform. We successfully realize a portfolio of thin-film lithium niobate devices for essential polarization management functionalities, including arbitrary polarization generation, fast polarization measurement, polarization scrambling, and automatic polarization control. The present devices feature ultra-fast control speed, low drive voltages, low optical losses and compact footprints. Using these devices, we achieve high fidelity polarization generation with a polarization extinction ratio up to 41.9 dB, fast polarization scrambling with a scrambling rate up to 65 Mrad/s, and endless polarization control with a tracking speed up to 10 Krad/s, all of which are best results in integrated optics. The demonstrated devices unlock a drastically new level of performance and scales in polarization management devices, leading to a paradigm shift in polarization management.
Peer Review Status:Awaiting Review
Subjects: Optics >> Quantum optics submitted time 2023-02-19
Abstract： Broadband Kerr combs with a flat comb spectral profile are expected in a number of applications, such as high-capacity optical communication. Here, we propose novel concentric dual-ring microresonators (DRMs) for advanced dispersion engineering to tailor the comb spectral profile. The dispersion can be flexibly engineered not only by the cross-section of the DRMs, but also by the gap between concentric dual-ring microresonators, which provides a new path to geometrically control the spectral profile of the soliton Kerr combs. An octave-spanning dissipative Kerr soliton comb with superior spectral flatness has been achieved numerically, covering from the telecommunication band to the mid-infrared (MIR) band region with a -40 dB bandwidth of 1265 nm (99.82 THz). Our results are promising to fully understand the nonlinear dynamics in hybrid modes in DRMs, which helps control broadband comb formation.
Peer Review Status:Awaiting Review
Hits
Hits
Downloads
Comment